See and Talk to Visitors From Your Phone
Your doorbell or camera can show you a live picture and let you talk to whoever is out there — from the couch, or from across the country. It takes about three taps, and the visitor never knows whether you are home.
- Open your camera’s app. That is the Ring, Blink, or Arlo app — the same one used to set the cameras up.
- Tap the camera’s picture. On the app’s home screen, tap the doorbell or camera you want. In Ring and Arlo this opens the live picture. In Blink, tap the camera, then tap the small live-view button on its screen.
- Turn up your phone’s volume. Their voice comes out of your phone’s speaker, and doorways are not quiet places.
- Tap the microphone to talk. In Ring, tap the microphone button once to start talking and once to stop. In Blink and Arlo, hold the button down while you talk, like a walkie-talkie, and let go to listen.
- Speak, then pause. There is a small delay both ways. Say your piece, take your finger off (or tap the mic off), and give them a beat to answer.
- Tap End or the X to finish. Closing the live picture saves the camera’s battery for the moments that matter.
Good to know
Every minute of live viewing drinks the camera’s battery, so peek when it matters rather than leaving it open as a window. And if the visitor has already walked away, check the saved recording instead — that only exists if your camera has a recording plan, which the lesson “Do You Need a Subscription for a Camera?” explains.