Two Homes, One App: Cameras at Your Other Place
Plenty of Florida households run two sets of cameras: the home they are in, and the home up north standing empty. One app can hold both — each home’s cameras live in their own group, and you switch groups with a tap. Ring calls a group a Location, Blink calls it a system, and Arlo calls it a Location too. This lesson sets up all three, and ends with the plan truth nobody mentions at the store.
Before the brands: the shape of it
- Each home’s cameras connect to that home’s Wi-Fi. The far home needs its own internet service, and it has to stay on while the house is empty — a camera cannot check in through a cancelled connection.
- Alerts from both homes arrive on the same phone. That is the point: the doorbell up north rings you in Florida.
- Name every camera with its home in the name — “Ohio — Front Door” and “Florida — Front Door” — or the alerts will confuse you within a week. (This site’s Smart Home shelf has a whole short lesson on naming gadgets well; the habit travels.)
Ring: a second Location
- Stand in the second home with its Wi-Fi running. In the Ring app, start setting up that home’s first device as usual.
- When the app asks for the address, give the second home’s address — Ring files the device under a new Location for that address.
- Add the rest of that home’s cameras the same way; they join the same Location.
- To switch homes later: open the app and tap the location name at the top of the dashboard, then pick the other home. Everything you see belongs to the home you picked.
Blink: a second system
- Each Blink home needs its own Sync Module plugged into that home’s router — one module serves up to ten cameras at its own house.
- In the Blink app, tap + and add the second home’s Sync Module, choosing to create a new system when asked, and name it for the home (“Ohio”).
- Add that home’s cameras to the new system.
- To switch homes: the systems sit as names at the top of the app’s home screen — tap (or swipe) to the one you want.
Arlo: a second Location
- In the Arlo app, add a new Location for the second home and give its exact address. Arlo uses that address for its emergency response features, so it should be the real one.
- Set up that home’s cameras while you are there; each camera belongs to the Location it was added under.
- Switch between Locations in the app to view, arm, or check either home.
The plan truth: the second home may need a second plan
- Ring: a Ring Protect plan covers one address. Ring’s own answer is plain: you need a separate plan for each address you want covered. Two homes, two plans, if you want recordings kept at both.
- Arlo: the same shape — Arlo’s own help says a plan does not stretch across Locations. Each Location carries its own subscription.
- Blink is the odd one out: its Plus plan belongs to your account, not to one address, so the cameras in both systems can ride on the one plan. (Blink’s cheaper Basic plan covers a single camera, as ever.)
- Without a plan, all three brands still give live view and motion alerts; what lapses is the saved recordings and the smarter alerts the plans pay for.
Keeping the empty house covered
- A person beats an app for the bad days: a neighbour or family member near the far home, added as a shared user (this shelf’s Let Family See the Cameras: Sharing Access Safely lesson shows how), can check the house when a camera shows something real.
- Battery cameras run down alone: at a house nobody visits for months, choose cameras that plug in, or arrange for someone to charge them. This shelf’s chart Wires, Batteries, and Solar: Powering Your Cameras compares the options.
- The far router matters: if that home’s internet or power blips, its cameras go quiet until it recovers. Quiet is information too — a whole home going silent at once is a power or internet problem, not five broken cameras.
If it goes wrong
- You set everything up but see no new cameras: you are looking at the wrong home. Switch the Location or system at the top of the app before suspecting the cameras.
- Alerts stopped for one home only: check that home’s plan. On Ring and Arlo the two homes’ plans renew separately, and one can lapse while the other is fine.
- Every camera at the far home shows offline: think internet or power at that house first — ask your neighbour, or the internet company’s outage map, before climbing any ladders by phone.
Words in this lesson
- Location — Ring and Arlo’s name for one address and all the cameras at it.
- System — Blink’s name for one home’s group of cameras.
- Sync Module — Blink’s small home-base box; one per home, plugged into that home’s router.
- Shared user — a person you invite to view some of your cameras without handing over your account.