Changing the Ink or Toner in Your Printer
When prints come out faint, streaky, or missing a color, it is time for a new ink or toner cartridge. It looks fiddly, but it is a five-minute job with no tools — the printer was designed for you to do this yourself.
Step by step
- Find out which cartridge is empty. The printer's little screen, or a message on your computer, names it — for example "Magenta low." Modern printers have one cartridge per color, so you only replace the empty one.
- Buy the exact same number. The old cartridge has a number printed on it (like 952, 67, or TN-760). Match that number and your printer's name exactly. Take a photo of the old cartridge to the store, or bring it with you.
- Turn the printer on — the parts inside only move into place when it has power.
- Open the cover the way you would to clear a jam. Wait while the cartridge carrier slides to the middle and fully stops.
- Take the old one out. Most press down gently on a tab and lift out. Set it aside on a paper towel.
- Unwrap the new cartridge. Peel off the tape or plastic cover over the ink opening. Try not to touch the shiny copper-colored contacts or the ink opening itself.
- Slide the new one in at the same angle, and press until it clicks.
- Close the cover. The printer may hum for a minute and print a test page with colored lines. That is an alignment page — it is the printer aiming itself, and it is completely normal.
- Print something you actually wanted to print, and check that the colors look right.
Tank printers: no cartridges at all
Some printers have ink tanks instead of cartridges — Epson EcoTank, Canon MegaTank, and HP Smart Tank are the big three. If your printer is one of these, ignore the steps above: there is no cartridge to slide out, and nothing to hunt for inside. You pour ink from a bottle into a tank.
- Check which color is low by looking at the little windows on the front of the printer — you can see the ink levels themselves.
- Buy the right bottle. Match the bottle number and color to your printer, the same as you would a cartridge number — each color has its own bottle.
- Open the tank cover and lift the cap of the empty tank.
- Fit the bottle onto the tank. The bottles are shaped so each color only fits its own tank, and the ink flows in by itself and stops at the right level — fill to the top line, no higher.
- Close the cap and cover. There is usually no alignment page with a refill — just print something and check the colors.
Good to know
Office-supply stores will take your old cartridges for recycling, and some give a small store credit for them — worth asking. Keep spare cartridges sealed in their boxes until you need them; they keep a long time that way. Cheaper store-brand cartridges usually work fine, though the printer may show a message claiming they are not genuine — it is safe to tap OK and carry on. One exception: if your HP printer is signed up for HP Instant Ink, replacement cartridges arrive by mail before you run out — use the ones HP sends, and do not buy spares off the shelf; the subscription cartridges only work while the plan is active.
Words in this lesson
- Cartridge — the removable container of ink (small, for inkjet printers) or toner (bigger, for laser printers).
- Toner — dry powder that laser printers use instead of liquid ink. It never dries out.
- Carrier — the moving holder inside the printer that carries the cartridges back and forth.
- Alignment page — the test page of lines and colors a printer makes to aim a new cartridge.