Both Sides and Booklets: The Fancy Print Settings
Three settings in the print window do the fancy work: printing on both sides of the sheet, folding pages into a booklet, and shrinking several pages onto one sheet for handouts. None of them needs a special printer program — they are already sitting in the window you see every time you print. The preview in that window is your safety net, and this lesson leans on it hard.
Both sides: two kinds of printer
Printing on both sides is called duplex (say: DOO-plex). Printers come in two kinds. An automatic printer flips the paper itself — you will see it pull a sheet back in and print the other side. A manual printer prints the fronts, then asks you to put the stack back in so it can print the backs. The print window tells you which kind you have: it offers either Print on Both Sides or Manually Print on Both Sides. If it offers neither, your printer may simply not have the flipping part — the manual route below still works, printing odd pages first, then even pages on the backs.
- Open the document and choose File, then Print. Look at the preview first — it should show your real first page.
- Find the both-sides choice — 'Print on Both Sides', 'Two-Sided', or 'Duplex'. On some printers it hides behind a Properties or Preferences button in the same window.
- Choose how the pages flip (the next section explains the two choices in plain words).
- Print a test first: set the pages to just 1–2 — one sheet — and check the back before you print the whole document.
Long edge or short edge, in plain words
- Flip on long edge means the back is printed so the pages turn like a book — you turn the page from the side. This is the right choice for ordinary upright (portrait) documents, and it is the usual default.
- Flip on short edge means the pages flip up, like a notepad or a wall calendar. Pick it for booklets, and for wide (landscape) pages that should read like a book — on wide pages the two choices swap jobs, which is exactly why the one-sheet test above matters more than any rule.
If the backs come out upside down, nothing is broken — the other edge was the right one. Switch it and print the test sheet again.
Booklets: folded, stapled, in the right order
A booklet is not just small pages. The pages must be laid out so that after printing, folding, and stapling, they read 1, 2, 3 in order — page 1 ends up sharing a sheet with the last page. Programs do that rearranging for you; never try to shuffle the pages yourself.
- From Word: open the document, go to Layout > Margins > Custom Margins, and next to Multiple pages choose Book fold. The page turns sideways (landscape) on its own, and the finished booklet will be half the width of your paper. Then File > Print, choose both-sides printing with flip on short edge — and for manual printers, Word prompts you to feed the stack back, flipped on the short edge.
- From a PDF: in Adobe's free Reader or Acrobat, open Print and choose the Booklet option. With an automatic printer, set the booklet subset to Both sides; with a manual one, print Front side only, turn the stack, and print again with Back side only.
- One rule that saves every booklet: turn booklet on in one place only — the program or the printer's own booklet setting, never both. Two rearrangers working at once scramble the order.
Several pages on one sheet: the handout trick
For meeting handouts and recipe collections, you can print 2, 4, or more pages side by side on a single sheet. In Adobe's reader: Print > Multiple > Pages per sheet, and pick the order they fill the sheet. Word and most printer windows offer the same idea under 'Pages per sheet' in Properties. Honest sizes: 2 per sheet stays comfortably readable; 4 per sheet is small but fine for slides and pictures; beyond that you are making an overview to glance at, not a page to read.
If it goes wrong
- The backs are upside down: the wrong flip edge. Change long to short (or the reverse) and reprint one test sheet.
- Booklet pages are out of order: booklet was switched on in two places. Turn it off in the printer settings and let the program do it alone.
- The both-sides choice is grey or missing: the printer likely has no automatic flipper, or its driver needs the option enabled in Properties. The manual route — fronts, reload, backs — always works; print two pages first and note which way the printed side faces going back in.
- Thick or photo paper will not duplex: many printers refuse two-sided printing on heavy paper, because the bent path is too tight. Print those one side at a time. (This shelf's chart Paper, Decoded: Sizes, Weights, and Which Side Faces Up covers which paper suits which job.)
The whole lesson in one line: preview first, one test sheet, and let exactly one setting do each fancy job.
Words in this lesson
- Duplex: printing on both sides of a sheet. Automatic duplex flips the paper for you; manual duplex asks you to reload it.
- Binding edge: the edge the pages are joined or flipped on — long edge turns like a book, short edge flips like a notepad.
- Booklet: pages arranged by the program so a folded, stapled stack reads in order.
- Pages per sheet: shrinking several document pages onto one printed sheet — the handout setting.