Printing Envelopes and Labels Without the Guesswork
Your printer can address an envelope and print a sheet of labels — no handwriting, no guesswork — but the job has its own small rules: the envelope goes in one specific way, the label sheet goes through once and only once, and the computer needs to be told exactly which envelope or label you bought. This lesson walks through both jobs in Microsoft Word first, then the Mac route (Pages and the Contacts app) and the free LibreOffice route, plus the test-print habits that make the first real one come out right. This shelf's paper chart covers the No. 10 envelope itself; this lesson is the printing.
Before you start: three honest facts
- Envelopes print one at a time. On almost every home printer you load a single envelope, print it, and load the next. A stack of envelopes in the tray is asking for a jam.
- Your printer's tray icon is the law. Moulded into the tray or printed on a sticker inside it is a small picture of an envelope or page showing which way it faces and which side the flap sits on. Printers genuinely differ on this — the icon on your machine beats any general rule, including the ones in this lesson.
- Label sheets are made for one kind of printer. The package says 'laser' or 'inkjet' on the front, and it matters: a laser printer's heat can melt the glue on inkjet labels, and inkjet ink smears on laser labels. Match the sheet to the machine before anything else.
Print one envelope in Word
- Open Word and click the Mailings tab at the top, then click Envelopes on the left.
- Type the two addresses. The Delivery address is who receives it; the Return address is yours. Word remembers your return address after the first time.
- Click Options and set the envelope size. Choose the size that matches your envelopes — Size 10 is the standard long business envelope a letter folds into thirds to fit. If your size is not listed, it can be measured and entered as a custom size.
- In that same Options box, open the Printing Options tab. It shows pictures of the ways an envelope can feed. Pick the picture that matches your printer's tray icon — face up or face down, flap this way or that.
- Load one envelope the way the tray icon shows, with the sliding guides snug against its edges — not tight enough to bend it, not loose enough to wander.
- Click Print. Look at the result before the envelope goes in the mail: right way up, nothing clipped, flap clear of the print. Your first envelope on any new printer is a test — use a spare, not the good stationery.
Print a sheet of labels in Word
- Look at your label package first. Find the maker's name (Avery is the common one) and the product number printed on the front — Word needs that number; it is how Word knows the labels' exact size and spacing.
- Click Mailings, then Labels. In the box that opens, click Options, choose your label maker and that product number, and click OK.
- Type the address in the Address box, and make sure 'Full page of the same label' is chosen — one address, repeated across the whole sheet. That is the usual job for return-address labels and holiday cards alike. (Different addresses on one sheet is a bigger job called mail merge — a fine thing to sit down and learn with help the first time.)
- Click New Document before printing, the first time. Word shows you the sheet laid out on screen, exactly as it will print, so a mistake costs nothing.
- Load the label sheet the way your tray icon shows for the printing side, and print. Ordinary paper rules apply: one sheet, guides snug.
The two label rules that save printers
- Never run a partly used label sheet through again. Once some labels are peeled off, the heat and rollers of a second pass can lift a remaining label off inside the machine — a stuck label in the works is a repair, not a jam you can wiggle free. Print a fresh sheet, or hand-write the last two labels. The label makers themselves give this warning; it is the most ignored instruction in home printing.
- Test on plain paper first. Print the labels once onto an ordinary sheet, then lay that sheet over a blank label sheet and hold both up to a window or lamp. If the words sit inside the label outlines in the light, the real sheet will come out right. If they drift, the product number is wrong — fix that, not the addresses.
On a Mac, without Word
A Mac has two honest routes, and neither needs Word.
- For an envelope in Pages: open Pages and, in the template chooser that appears, look for the Envelopes templates. Pick the one that matches your envelope, type the two addresses over the samples, and print — in the print window, make sure the paper size matches your envelope, and load the envelope the way your printer's tray icon shows.
- For envelopes and labels from Contacts: open the Contacts app and click the person you are writing to. Choose File, then Print. In the style menu, choose Envelopes to address a single envelope, or Mailing Labels for a sheet — for labels, pick the layout that matches your label package (the Avery layouts are in the list). Click Print. Apple built this for exactly this job, and it uses the address you already have saved.
The two label rules above apply word for word on a Mac: never run a partly used sheet through twice, and test on plain paper against the light first.
In LibreOffice (free, on Windows or Mac)
LibreOffice is the free word processor many computers already carry, and it was built with both jobs in mind.
- For an envelope: open a document, then click Insert, then Envelope. A box opens with room for the address you are sending to and your own return address, an envelope-size choice (Size 10 is the standard long envelope), and a Printer tab showing feed pictures like Word's — pick the one that matches your tray icon. Click New Doc to see the envelope laid out on screen, load one envelope, and print.
- For labels: click File, then New, then Labels. Choose the label's brand and product number from the lists — the same number printed on your package — type the address, and click New Document to see the whole sheet before printing it, exactly like Word's preview habit.
If it goes wrong
- Printing comes out sideways or upside down: the feed picture in Printing Options does not match how you loaded it. Change one — the picture or the loading — not both, and test again on a spare envelope.
- Labels creep further off with every row: the product number in Options does not match the package. That number is the spacing; a near-miss number produces exactly this creep.
- Ink smears off the labels with a fingertip: the sheet is the wrong type for your printer (see the third fact at the top). No setting fixes it; the sheet has to change.
- An envelope jams: turn the printer off, open it, and pull the envelope out slowly in the direction it was travelling — never backwards against the rollers — then check no torn corner stayed behind. Two envelopes stuck together is the usual cause, which is why they print one at a time.
The whole lesson in one line: tell Word exactly what you bought (size, product number), load it the way your own tray's icon shows, test on something cheap — and a label sheet goes through the printer once in its life, never twice.
Words in this lesson
- Size 10 envelope: the standard long business envelope, about 4 by 9½ inches, that a letter page folds into thirds to fit.
- Product number: the label maker's code for one exact sheet layout. Word's label settings are built around it.
- Feed: the path paper travels through the printer — and the direction a sheet must face to print on the right side.
- Mail merge: the word-processor job that puts a different address on each label of a sheet, pulled from a list. Powerful, and worth learning with help the first time.