Making Copies on Your Printer (No Computer Needed)

Your printer is also a copier. One page or a small stack, black or color — no computer, no phone, and no Wi-Fi needed. Just the page, the glass, and one button.

Copying one page, step by step

  1. Lift the top lid. Underneath is a flat sheet of glass.
  2. Place your page face down on the glass. Line its top corner up with the corner marked by little arrows — most printers use the back-left or front-left corner. When in doubt, match the arrows printed around the glass.
  3. Close the lid gently. For a book or thick item, just rest the lid on top as far as it goes.
  4. Press the copy button. There is one for black copies (often marked with a black rectangle or "Black") and one for color. On many printers the button simply says Start Copy.
  5. Wait for the light to do its pass and your copy to slide out. That is the whole job.

Copies of several pages, and both sides

For more than one copy of the same page: on printers with a screen, set the number of copies first, then press the copy button once. On simpler printers, press the copy button once per copy.

For a stack of pages, some printers have a feeder tray on top (it looks like a second lid with paper guides). Load the pages as the little picture on the tray shows, and the printer pulls them through one at a time.

For a two-sided original on a basic printer: copy side one, turn the original over, and copy side two onto a fresh sheet — or onto the back of the first sheet by putting that sheet back in the paper tray printed-side up. One practice run on scrap paper is worth it; every printer's tray direction is a little different.

Making a copy bigger (or smaller)

The most-loved copier trick of all: blowing up small print — a recipe card, a medicine label, the fine print on a letter — so it is easy to read. Nearly every printer with a screen can do it:

  1. Put the page on the glass just like a normal copy.
  2. Look for the size setting. On the printer's screen or panel it may be called Resize, Reduce/Enlarge, Zoom, or Copy Size. On some printers it hides under a Settings or gear button on the copy screen.
  3. Pick a bigger size. 100% is same-size. Choose 150% or 200% to make the print much bigger — or pick a ready-made choice like "Letter to Legal" if it is offered. For a smaller copy (fitting a big page onto one sheet), choose a number under 100%, like 75%.
  4. Press the copy button. A heads-up: a much bigger copy may not fit on one sheet of paper — the edges can get cut off. For something precious, make a test copy on a scrap sheet first.

Printers with no screen sometimes have a simple Enlarge button or a size dial on the panel itself. The names differ a little from brand to brand, but the idea is always the same: pick the size first, then press Copy.

Good to know

Some printers have an ID Card Copy button that copies both sides of a driver's license or insurance card onto one page — genuinely handy for doctor's offices. And if your copies keep coming out with a gray streak down the page, wipe the glass with a soft, slightly damp cloth; a speck on the glass copies onto every page.

Copies coming out faint or washed-out gray? Two things fix it almost every time. First, check your ink or toner — copies fade early when a cartridge is running low, even while regular printing still looks fine. Second, look for a Density or Darkness setting on the copy screen (sometimes under Settings) and move it one or two steps darker; that setting affects copies only, and you can always move it back.

Words in this lesson

Straight 2 Work Tech, LLC — patient, plain-words tech help.
(813) 770-6082