Printing With a Cable When Wi-Fi Won't Cooperate

If the printer and the Wi-Fi refuse to get along, an old-fashioned cable between the printer and the computer almost always works. No passwords, no signal to lose — you plug in, and you print.

Step by step

  1. Get a printer cable. It is called a USB printer cable: one end is flat (goes into the computer), the other end is almost square with two corners clipped (goes into the printer). Many printers do not include one in the box; they cost a few dollars at any store that sells printers.
  2. Plug the square-ish end into the back of the printer. There is only one socket it fits.
  3. Plug the flat end into the computer. Any matching socket will do.
  4. Turn the printer on and give the computer a full minute. It notices the printer and quietly sets itself up — you may see a small "device ready" message.
  5. Open what you want to print and choose Print as usual.
  6. Check which printer is selected. If your printer's name appears twice, pick the one that does not say "offline." You can tell you picked right when the page comes out.
  7. Print one test page first before printing a long document, just to see it work.

Good to know

The cable trick needs the computer near the printer — printer cables are usually about six feet long. You do not have to undo the Wi-Fi setup to use a cable; both can exist, and plenty of people keep the cable plugged in permanently as the reliable option. One limit: phones and tablets cannot print through this cable. Phone printing needs Wi-Fi, so if phone printing is the thing that matters, that is worth a call to Sean at (813) 770-6082.

Words in this lesson

Straight 2 Work Tech, LLC — patient, plain-words tech help.
(813) 770-6082