QR Codes: Point Your Camera, Tap the Link

A QR code is a square picture that holds a web address or a small instruction. Your phone's camera reads it and offers to act on it — open a restaurant menu, join a Wi-Fi network, show a ticket. No typing, no app to install: the camera you already have is the scanner. This lesson covers scanning on iPhone, Samsung, and other Android phones (each path spelled out), what codes are used for, making a QR code of your own home Wi-Fi for guests, and the one safety habit that matters — a code is just a link, and links deserve a two-second look before you tap.

Words to know first

Scanning, on an iPhone

  1. Open the Camera app and stay in the ordinary Photo mode — no special setting to find.
  2. Point the camera at the code, close enough that it sits clearly in the frame. Hold steady for a moment.
  3. A link appears — a small banner on the screen showing the address the code holds.
  4. Read the address (see the safety section below), then tap it to go.
  5. The alternative route: newer iPhones also offer a Scan Code control in Control Center — swipe down from the top of the screen to find it. Same result, one less hunt through the camera.

Scanning, on a Samsung Galaxy

  1. Open the Camera app and point it at the code. On most Galaxy phones a pop-up with the link appears by itself.
  2. If nothing happens, the scanning switch is off: in the Camera app, tap the gear (Settings) and turn on Scan QR codes. Then point again.
  3. The other route: swipe down from the top of the screen twice to open the full Quick Settings panel and tap Scan QR code — a plain scanner screen opens, no camera settings involved.
  4. Read the preview, then tap it to go.

Scanning, on other Android phones (Pixel and most others)

  1. Open the Camera app and point it at the code, steady, in Photo mode.
  2. A banner appears along the bottom or over the code, showing the address.
  3. Read the banner, then tap it to go.
  4. If your camera does not notice codes, open Google Lens (the camera-shaped icon in the Google app, or a Lens button in the camera) and point it the same way — Lens reads codes on nearly every Android phone.

A code that's already on your phone

What codes actually do

Make one of your own: Wi-Fi for guests

  1. On a newer iPhone: open the Passwords app, tap Wi-Fi, choose your home network, and tap Show QR Code. Your guest points their camera at your screen and joins — the password is never spoken aloud or written down.
  2. On a Samsung or other Android phone: open Settings, then your Wi-Fi (or Network) settings, tap your connected home network, and tap Share. A QR code appears for your guest to scan the same way.
  3. Why bother: guests get on the internet, your password stays unspoken, and nobody reads a string of letters off the router sticker. Our lesson Finding and Sharing Your Wi-Fi Password covers the other ways to share, and when each fits.

Safety: look before you tap

Words in this lesson

Straight 2 Work Tech, LLC — patient, plain-words tech help.
(813) 770-6082