One Pair of Headphones, Two Devices: Multipoint Bluetooth
Multipoint means your headphones stay connected to two devices at once — the tablet and the phone, or the laptop and the phone — and the sound moves between them by itself. Watch a video on the tablet; when the phone rings, the same headphones ring, and you answer without touching a setting. When the call ends, the video's sound usually comes back on its own.
Which headphones can do it
Multipoint is a feature of the headphones, not of the phone, so it has to be built in. The lines that document it plainly: Bose QuietComfort Ultra headphones and earbuds, Sony WH-1000X headphones (the XM4 and later), Jabra Elite earbuds, Google Pixel Buds Pro (and the newer Pro 2), and recent Anker Soundcore models in the Liberty and Space lines. Plenty of perfectly good headphones and earbuds cannot do it at all — before you hunt for the setting, look for the word multipoint (or “connect to 2 devices”) on the box, in the app, or in the manual. One special case: Apple's AirPods switch by themselves between an iPhone, iPad, and Mac signed into the same Apple account, which feels similar — but that is Apple's own system, and it does not stretch to a Windows computer.
Bose QuietComfort Ultra: it is on by default
- Pair the headphones with your first device the normal way (the Bose app walks you through it).
- Pair the second device: on that device, open Settings → Bluetooth, make the headphones ready to pair (in the Bose app, or with the Bluetooth button on the headphones), and choose their name from the list.
- To check or change the setting: open the Bose app, tap your headphones, and open the Bluetooth / Sources screen — the Multi-point Connection switch lives there. Turning it off disconnects the second device.
Sony WH-1000X: one switch in the app
- Open Sony's headphone app — it may be called Sony | Headphones Connect, or Sony | Sound Connect on newer copies.
- Open the System tab and turn on Connect to 2 devices simultaneously.
- Then connect the second device from its Bluetooth settings, the same as any pairing. From then on, both stay connected.
One Sony trade-off, stated by Sony itself: while two devices are connected, the headphones set aside their very highest sound-quality option (called LDAC). Music still sounds good — most people never notice — but if the finest sound is the whole point for you, that is the cost of the second connection.
Jabra Elite earbuds: pair each one, then tap the first again
- Pair the earbuds with the first phone the normal way, through its Bluetooth settings.
- Pair them with the second phone the same way, separately.
- Go back to the first phone's Bluetooth list and tap the Jabra name once more. That tap completes the two-device pairing — it is the step everyone misses.
Jabra's own notes add two honest details: only one device plays sound at a time, and your voice assistant answers from the phone you paired last. The Jabra Sound+ app is where you update the earbuds and manage their settings.
Google Pixel Buds Pro: one switch in the settings
- Pair the earbuds with your first device the normal way, and open their settings: on a Pixel phone, Settings → Connected devices, then tap the gear beside the Pixel Buds' name. On another Android phone, the same page lives inside the Pixel Buds app.
- Turn on Multipoint. That is the whole secret — with it off, the earbuds keep only one connection.
- Connect the second device from its Bluetooth settings while the earbuds are in pairing mode. From then on, both stay connected.
Google is plain about the same two rules as everyone else: only one device plays sound at a time, and a ringing phone takes over from whatever you were hearing. On a Pixel phone there is also an Audio switch feature that moves the buds between your own Google devices by itself — like AirPods, that is the maker's own system, separate from multipoint.
Anker Soundcore earbuds and headphones (recent Liberty and Space models) do the same job under a plainer name: open the Soundcore app, find Dual Connections in the settings, turn it on, and connect the second device from its Bluetooth list.
How the switching decides
- Only one device makes sound at a time. To move from the tablet to the laptop, pause (or stop) what is playing on the tablet, then press play on the laptop. The sound follows the device that is playing.
- Calls jump the queue. If either connected phone rings, the headphones ring too, whatever you were listening to. Answer, and the music or video pauses; hang up, and it usually picks up where it left off.
- Little sounds count as sound. A notification chirp on the device you are not watching can pull the audio over for a second. If that annoys you, silence the second device's notifications — or turn multipoint off in the app while you watch something.
The honest limits
- Two devices, not three. Adding a third means one of the others lets go.
- Laptops are the fussy partner. An older computer's Bluetooth may connect for music but not for call sound, or may grab the headphones the moment it wakes up. It is the computer being old-fashioned, not the headphones failing.
- It is not on every model. If the app has no multipoint switch and the manual never uses the word, your headphones almost certainly cannot do it — no setting will add it later (a few models have gained it through an app update, so one update check is worth it).
If it goes wrong
- The second device will not connect. First check the multipoint switch is on in the headphone app. Then check the headphones are not already connected to two other devices — disconnect one.
- The sound keeps jumping away from what you are watching. The other device is making sounds — a video autoplaying, a notification. Pause or silence that device, or switch multipoint off for the evening.
- Calls come through but music will not (or the reverse) on a computer. Open the computer's sound settings and make sure the headphones are chosen for both output and microphone. Computers list some headphones twice — once for music, once for calls.
Words in this lesson
- Multipoint: a Bluetooth feature that keeps headphones connected to two devices at the same time, so sound can move between them without re-pairing.
- Pair: introducing two devices to each other once, so they remember and reconnect on their own.
- Bluetooth: the short-range wireless link between your headphones and a phone, tablet, or computer.
- App (companion app): the free phone app from the headphone maker — Bose, Sony | Sound Connect, Jabra Sound+, Pixel Buds, Soundcore — where the extra settings live.