Connect Headphones, a Keyboard, and More to Your Tablet — Without Wires

Your tablet can talk without wires to headphones, a speaker, a keyboard, and more — that invisible connection is called Bluetooth, and pairing it up is a one-time, five-minute job. This lesson covers it end to end on an iPad, a Samsung Galaxy Tab, an Amazon Fire tablet, and a Lenovo or other Android tablet: how to put your gadget into pairing mode, where the connect button lives on each tablet, what to do when the gadget will not appear, and how to make the tablet forget a gadget you no longer use. It is the natural next step after borrowing a library audiobook — this shelf's Free Library Apps lesson — when you would rather listen through headphones than the tablet's speakers.

The one idea underneath all of it

Pairing means introducing two gadgets so they remember each other. You do it once. After that, the tablet reconnects on its own every time both are on and near each other — usually within about 30 feet, with no wall of menus to repeat. Pairing mode is the gadget's way of saying “I am ready to be introduced”: most headphones and speakers enter it by holding their power button a few seconds longer than a normal switch-on, until a light blinks or a voice says “pairing.” The gadget's own little instruction card is the authority on its exact button — that part genuinely differs by brand.

Connect on an iPad

  1. Put the gadget in pairing mode first — light blinking or voice prompt — and keep it within a few feet of the iPad.
  2. Open Settings, then tap Bluetooth. Make sure the Bluetooth switch at the top is on (green).
  3. Wait under “Other Devices” for your gadget's name to appear, then tap its name once.
  4. When it moves up to “My Devices” and says Connected, you are done. Sound and typing now go to the gadget. Apple's own support pages describe this same path for headphones, keyboards, and other accessories.

Connect on a Samsung Galaxy Tab

  1. Put the gadget in pairing mode and keep it close.
  2. Swipe down from the top of the screen and touch and hold the Bluetooth symbol — or open Settings, then Connections, then Bluetooth.
  3. Make sure Bluetooth is on, then tap your gadget's name under “Available devices.” If the list is empty, tap Scan to look again.
  4. Tap Pair or OK if the tablet asks. The gadget moves to “Paired devices” and connects. Samsung's support pages give this same sequence for the Galaxy Tab line.

Connect on an Amazon Fire tablet

  1. Put the gadget in pairing mode and keep it close.
  2. Open Settings, then Connected Devices, then Bluetooth (on older Fire tablets: Wireless, then Bluetooth).
  3. Turn Bluetooth on and tap “Pair a New Device.”
  4. Tap your gadget's name when it appears. Amazon's Fire tablet help describes this path for Bluetooth speakers, headphones, and keyboards.

Connect on a Lenovo or another Android tablet

  1. Put the gadget in pairing mode and keep it close.
  2. Open Settings, then Connected devices, then Pair new device. (If your tablet does not show those words, try Settings, then Connected devices, then Bluetooth — same door, longer hallway.)
  3. Tap your gadget's name under “Available devices.”
  4. Tap Pair if the tablet asks. The gadget moves to your saved list and connects. Lenovo's tablets follow this plain Android path — the same one Google documents for its own devices — so if a menu word differs slightly on yours, you are still in the right place.

When the gadget will not appear

  1. Charge the gadget. A nearly flat headphone battery is the most common cause of a gadget that will not enter pairing mode.
  2. Move it away from its old partner. Many headphones connect automatically to the last phone or tablet they knew — if they are busy talking to that device, they will not show up for a new one. Turn Bluetooth off on the old device for a minute, or move out of its room.
  3. Restart both. Turn the gadget fully off and on into pairing mode again, and toggle the tablet's Bluetooth off and back on. This clears most stuck introductions.
  4. Make the tablet forget and start fresh. If the name appears but connecting fails, use the Forget step below, then pair again from the beginning.
  5. If the tablet asks for a code: some older speakers, keyboards, and car gadgets ask for a pairing PIN before they will connect. The code is on the gadget's instruction card — and when that card is long gone, the code is almost always 0000. Type it and tap Pair.
  6. Connected, but the sound still comes out of the tablet: tap the gadget's name in the Bluetooth list once more so it truly says Connected, check the volume buttons on the gadget itself, and — on a Galaxy Tab — swipe down from the top, tap Media output, and choose the gadget there. The tablet was paired; it just had not handed the sound over.

Make a tablet forget a gadget

On an iPad: Settings, then Bluetooth, tap the small i in a circle beside the gadget's name, then Forget This Device. On a Galaxy Tab: Settings, then Connections, then Bluetooth, tap the gear beside the name, then Unpair. On a Fire tablet: Settings, then Connected Devices, then Bluetooth, tap the gadget, then Forget. On a Lenovo or other Android tablet: Settings, then Connected devices, tap the gear beside the gadget's name, then Forget. Forgetting is not breaking — you can pair the same gadget again any time you like.

Good to know

Two gadgets at once has limits. A tablet happily remembers many gadgets but usually plays sound through only one at a time — if your speaker is connected, your headphones wait their turn. Bluetooth costs little battery compared with the screen; leaving it on is fine for most people. And only pair with gadgets you own, in your own home: if a pairing request ever pops up that you did not start, tap Cancel — you never have to accept an invitation you weren't expecting.

Words in this lesson

Straight 2 Work Tech, LLC — patient, plain-words tech help.
(813) 770-6082