One Remote for Everything: The TV Setting That Lets Your Devices Talk

Your TV, your streaming stick, and your soundbar can already talk to each other through the HDMI cable that connects them — one setting, switched on, lets a single remote wake the TV, jump to the right input, and run the volume. The setting has a different name on every brand, which is why almost nobody finds it. This lesson gives you the names, the paths, and the honest trade-offs.

What it does for you

With the setting on at both ends, three everyday things fix themselves. Press any button on your Roku or Fire TV remote and the TV turns on by itself, already on the right input — no hunting for the TV remote, no input button. Use the TV remote's volume buttons and they run the soundbar, because the TV passes the command down the cable. Turn the TV off and the soundbar and streaming box go to sleep with it. One remote on the coffee table can honestly be enough.

One setting, many names

Your TV or boxThe name to look for
Any brand, the real nameHDMI-CEC (Consumer Electronics Control)
Samsung TVAnynet+
LG TVSIMPLINK
Sony TVBRAVIA Sync
Roku TV or Roku playerControl other devices (CEC) — and inside it, 1-touch play
Fire TV or Fire TV Edition TVHDMI-CEC Device Control, under Display & Sounds
Vizio TVCEC — Vizio uses the plain name, under System
Apple TV boxControl TVs and Receivers, under Remotes and Devices

Other brands use other names again — some just say HDMI Control. If your TV's manual or settings search offers any of these, you have found the same setting.

Turn it on, brand by brand

  1. Samsung: press Home, then Settings, then All Settings, then Connection, then External Device Manager, then Anynet+ (HDMI-CEC) — set it On. (On some models the same path sits under General instead of Connection. Most newer Samsung TVs have it on already.)
  2. LG: press the Settings button, choose All Settings, then General, then Devices, then HDMI Settings, then SIMPLINK (HDMI-CEC) — set it On.
  3. Sony: press Home, then Settings, then Watching TV, then External inputs, then BRAVIA Sync settings, then BRAVIA Sync control — turn it on. Two neighbors in the same list are worth knowing: Auto devices off (boxes sleep when the TV sleeps) and Auto TV on (the TV wakes when a box wakes).
  4. Roku TV: press Home, then Settings, then System, then Control other devices (CEC), and tick 1-touch play. (On a Roku player plugged into another TV, the same setting lives at Settings, then System, then Control other devices — and the TV's own setting must be on too.)
  5. Fire TV: go to Settings, then Display & Sounds, then HDMI-CEC Device Control, and turn it on.
  6. Vizio: press Menu, then System, then CEC — set it to Enable. (Your set may also offer “ARC only”; that is the sound part by itself, for a soundbar.)
  7. Apple TV box: go to Settings, then Remotes and Devices, and under Home Theater Control turn on Control TVs and Receivers. The Apple TV remote's volume buttons then run the TV or soundbar as well.
  8. Then check the other end. The setting must be on in the TV and in the box or soundbar it talks to — many soundbars and players have the same switch in their own settings. Both ends agreeing is the whole secret.

Try it

Pick up the streaming remote — the small one — and press any button except volume. The TV should wake up already showing that device. Now turn the TV off with whichever remote you like, and watch the soundbar's light go to sleep too. If both happened, your one-remote setup is done.

If it goes wrong

The TV turns on by itself, or jumps inputs on its own. Some box in the chain is waking up and calling the TV with it — a game console checking for updates is the classic. Turn the setting off in that one device, or turn off the TV's auto-wake choice (Sony's Auto TV on, LG's Auto Power Sync) and keep the rest. Volume works but power doesn't — or the other way round. Brands speak this shared language with different accents, and mixed brands sometimes share only part of it. What works is real; what doesn't is not a fault in your TV. One volume check is worth making before you give up on it: sound sent back to a soundbar rides the one HDMI socket marked ARC or eARC — if the soundbar is plugged into any other socket, move it to the marked one. Nothing happens at all. Check the cable is truly an HDMI cable and pushed in fully, try a different HDMI socket on the TV, and restart both the TV and the box — then check the setting is on at both ends. The cable box fights you. Older cable boxes often handle this setting poorly or not at all. Leave the cable box out of the arrangement and let the setting run between the TV, the streamer, and the soundbar.

Words in this lesson

Straight 2 Work Tech, LLC — patient, plain-words tech help.
(813) 770-6082