Rename Your TV's Inputs and Stop Guessing

"HDMI 2" tells you nothing. "DVD Player" tells you everything. Nearly every TV lets you rename its inputs — the sockets your cable box, DVD player, and streaming stick plug into — so the list you pick from uses real names instead of numbers. It takes about ten minutes, once, and the daily guessing ends for good.

First: find out what is plugged in where

  1. Turn on one device — say, the cable box — and flip through the TV's inputs until its picture appears. Note which input number it was.
  2. Repeat for each device you use: the DVD or Blu-ray player, the Roku or Fire TV stick, the game console. A scrap of paper with "cable = HDMI 1, DVD = HDMI 2" is all you need.
  3. Peek at the back or side of the TV if a device will not show itself: the sockets are printed with their numbers, HDMI 1, HDMI 2, and so on. Match each cable to its printed number.

Samsung TVs

  1. Press Home on the remote, then press Left and choose Connected Devices.
  2. Highlight the input you want to rename, then press the Down button. A small menu appears.
  3. Choose Edit. Type the real name — Cable Box, DVD Player — and pick a matching picture if offered. On older Samsung TVs the same idea hides slightly differently: press Source, highlight the input, and look for Edit Name (sometimes under a Tools button).

LG TVs

  1. Press the Input button on the remote (or press Home and open Home Hub). The input list appears.
  2. Choose the three dots (⋯) at the top right of that screen, then choose Edit Inputs.
  3. Select the input's name, type the name you actually call the device, and press Enter. You can change its picture on the same screen. Choose Save when you are done. On older LG TVs, look for an All Inputs screen with an edit option — the name of the door varies, the room is the same.

Sony TVs

  1. Press the Quick Settings button (the gear) on the remote, then choose Settings.
  2. Choose Channels & Inputs, then External inputs, then Manage inputs.
  3. Choose the input and give it its label. One honest Sony note: many models offer a list of ready-made labels — Cable Box, DVD Player, Game Console — rather than letting you type your own words. Pick the closest match; a close name still ends the guessing.

Roku TVs (TCL, Hisense, onn., and Roku's own)

  1. Press Home, then open Settings, then TV inputs.
  2. Select the input you want to rename, then choose Rename. Pick a name from the list, or choose Set name & icon to type your own words and choose its picture.
  3. Shortcut: on the Home screen, highlight the input's tile, press the Star (*) button, and choose Rename input — same job, fewer doors.

Vizio TVs

  1. Switch to the input you want to rename first — press Input and choose the device. Vizio renames the input you are on right now, so be watching the right one.
  2. Press Menu, then choose System, then Input Name. (On older Vizio TVs the same door reads Menu, then Settings, then Name Input — and there you pick which input from a list instead.)
  3. Highlight the "Name Input" row, press OK, and type the real name — Cable Box, DVD Player — with the on-screen keyboard. Press OK to finish.
  4. One honest Vizio limit: the built-in SmartCast and WatchFree choices are not sockets, so they cannot be renamed — only the real plugs, HDMI 1 and its brothers, take new names.

The fix that works on every TV ever made

If your TV has no renaming at all — or you would simply rather not menu-dive — do what technicians have done for decades: a small piece of painter's tape on each cable, right behind the plug, with the device's name written on it in marker ("CABLE," "DVD," "ROKU"), and the same names on a note card kept with the remote. It is not a lesser fix. It works with the power off, it survives every TV replacement, and when Sean visits a home, this is still the trick he reaches for first on a stubborn set.

If it goes wrong

The new name did not stick. You probably backed out before confirming. Redo it and be sure to press Save, OK, or Enter at the end — most TVs only keep the name after that last press. An input is missing from the list. Many TVs hide inputs with nothing awake on the other end. Turn the device on first, then open the list again. Two devices share one socket through a little switch box. Name that input for the box ("DVD and Games"), and let tape labels on the cables tell the two apart. You renamed the wrong one. Nothing is harmed — rename it again. Names are paint, not concrete.

Words in this lesson

Straight 2 Work Tech, LLC — patient, plain-words tech help.
(813) 770-6082