Water and Your Watch: Showers, Swimming, and the Lock Button
Your watch is water-resistant. Those words are chosen on purpose — no watch is “waterproof.” Resistant means it shrugs off splashes, rain, and (on most models) a swim. It does not mean every kind of water is safe. This lesson covers what the ratings really promise, the Water Lock button on Apple and Galaxy watches, what Pixel Watch and Fitbit owners get instead, and the few habits that keep the seals alive.
The ratings, in plain words
- Apple Watch Series 2 and later (including SE models) are rated for water down to 50 metres — swimming in a pool or the ocean is fine. The Ultra models are rated to 100 metres.
- The very first Apple Watch and Series 1 are splash-resistant only. Hand-washing and rain, yes. Swimming or showering, no.
- Galaxy Watches carry a 5ATM + IP68 rating — the 5ATM part means they passed a test equal to about 50 metres of pressure, meant for shallow water like a pool.
- Google Pixel Watch (every model so far) is also rated 5ATM — about 50 metres, the same pool-swimming promise as the Galaxy. What it does not have is the speaker trick the other two play after a swim; its section below covers that honestly.
- Fitbit trackers and watches — the Charge, Versa, and Sense families — are water-resistant to 50 metres on most current models, and many can even spot a swim by themselves and start the swim workout for you. A few of the oldest or simplest models are splash-only, so check your own model's number before its first swim.
- Those numbers come from a calm laboratory test. They are not a promise about hot water, fast-moving water, or a watch whose seals have aged. Apple and Samsung both say the resistance wears down over time and cannot be restored.
The one thing Water Lock does NOT do
The droplet button called Water Lock (Samsung calls it Water lock mode) does two jobs, and protection is not one of them:
- It locks the touch screen, so splashing water cannot tap buttons and send nonsense.
- When you turn it off, the watch plays a series of tones that push water out of the speaker.
The water resistance itself is built into the watch. Water Lock just manages the screen and the speaker.
Apple Watch: a swim, start to finish
- Press the side button to open Control Center, then tap the water droplet to turn Water Lock on. (Starting a swimming workout turns it on by itself.)
- Swim. The screen stays locked, so the water cannot press anything.
- When you are out, press and hold the Digital Crown (the round dial) until the watch says Unlocked and beeps — those beeps are the water leaving the speaker. On older watch software, turn the Digital Crown instead of holding it.
- Dry the watch with a soft, lint-free cloth.
Galaxy Watch: the same swim
- Swipe down from the top of the watch face and tap the water droplet icon. (It also lives at Settings → Advanced features → Water lock.) A swimming workout turns it on by itself.
- Swim, with the screen locked against the water.
- When you are out, press and hold the Home key for about two seconds. The watch plays sounds to push water out of the speaker.
- Shake the watch gently, dry it with a soft cloth, and let it air-dry before charging.
Pixel Watch: the same swim, one honest difference
- There is no droplet button to tap first — the Pixel Watch has no Water Lock. With its 5ATM rating, you can simply swim. (The touch screen may still notice the water; if it misbehaves mid-swim, that is the screen feeling splashes, not damage.)
- Out of the water, rinse the watch gently in fresh water if it met the ocean or a chlorinated pool, then dry it with a soft cloth.
- The honest difference: there are no eject sounds. Apple and Galaxy watches beep water out of the speaker; the Pixel Watch cannot. If the speaker sounds muffled after a swim, shake the watch gently, set it down speaker-side down, and give it time — it clears as it dries, usually within a few hours.
- Let it dry fully before charging, exactly like the other two brands.
Fitbit: water, with a simpler lock
- Many recent Fitbits (Charge, Versa, and Sense models) have a Water Lock among their quick settings — swipe down from the clock face and tap the droplet. It locks the screen against splashes, like the bigger watches do.
- Swim. Some models notice the swimming on their own and start a swim workout for you; if yours does not, start the Swim exercise yourself before you get in.
- When you are out, turn Water Lock off the way your model asks (usually a firm double-tap or a button press, shown on the screen). There are no eject sounds — Fitbit never had them. A muffled speaker, on the models that have one, just needs the same drying time as the Pixel Watch.
- Rinse off salt or pool chemicals in fresh water, dry with a soft cloth, and let it air-dry before it goes on the charger.
The honest list: what to keep away
- Soap, shampoo, lotions, and perfume. Both makers warn these wear at the seals and the speaker mesh. If the watch gets soapy, rinse it gently under warm tap water instead of wearing it through the shower soap. Many owners simply take the watch off for the shower — it is a natural charging break.
- Heat and steam: hot tubs, saunas, and steam rooms. Heat is harder on seals than pool water is.
- Fast water: diving, water skiing, and jumping in from a height on the regular models — the 50-metre rating assumes still water, not a slap at speed.
- Pressing buttons or the crown underwater. Leave the controls alone until you are out.
- Salt water without a rinse. After the ocean, rinse the watch gently in fresh water and dry it, exactly as Samsung instructs.
- The wrong band. Sport and nylon bands swim happily. Leather and dressy fabric or metal bands are not made for swimming — check the band, not just the watch.
If it goes wrong
- Sound is muffled after a swim: water is still in the speaker. Run the Water Lock eject sounds once more and let the watch air-dry. Never poke anything into the speaker holes.
- Never dry it with heat or air blasts: no hair dryer, no canned air. Both makers warn against them. Time and a soft cloth do the job.
- Do not charge a wet watch. Dry it fully first.
- It got dropped, cracked, or is a few years old: treat the rating as weaker than the box said. Resistance fades with knocks and age, and a cracked screen ends it.
Words in this lesson
- Water-resistant — built to keep everyday water out, within limits. Not the same as waterproof.
- Water Lock — the droplet setting that locks the touch screen and, when turned off, beeps water out of the speaker.
- Speaker eject — those beeps themselves: tones that push water out of the speaker holes. Apple and Galaxy watches have it; Pixel Watch and Fitbit do not — drying time does the same job, more slowly.
- ATM rating — a pressure score from a laboratory test. 5ATM is the watch version of “about 50 metres, in still water.”
- Digital Crown — the small round dial on the side of an Apple Watch.
- Home key — the top side button on a Galaxy Watch.