A New Name for Your Wi-Fi: Rename It and Change the Password
Your Wi-Fi's name and password are yours to change — but treat it as a house-wide job, not a one-box job. The moment you save the new name or password, every phone, TV, printer, and gadget in the house is holding the old one, and each must be told the new one. This lesson walks the change in the order that keeps it calm. It is the companion to Finding Your Wi-Fi Password and Sharing It With Guests — that lesson finds the password you have; this one replaces it.
Decide both, and write them down first
- The name (the tech word is SSID) is public — every neighbour sees it in their Wi-Fi list. Pick something friendly that is not your street address or your full name.
- The password should be a long phrase you can say out loud and type on a TV screen — several words strung together beat one short scramble. This password is not the router's own admin password; the two are different keys, and they should not match.
- Write the pair down on the card that lives with the router, before you change anything.
Make the change
- Connect the steady way: use a computer plugged into the router with a cable if you have one, so your own connection survives the change. On your phone's router app is fine too — you will just have to rejoin once at the end.
- Open the router's settings — its app (Deco, Orbi, eero, Tether, and the like) or its settings page in a browser — and find Wi-Fi Settings or Wireless, then the main network.
- Type the new name and password. If your router shows two networks, 2.4 and 5, give both the same new name and password unless you have a reason not to — one name is the simpler house. Tap Save.
Expect the drop — then reconnect, in order
- Everything Wi-Fi disconnects at once. That is the change working, not breaking. (Anything plugged in by cable never notices.)
- Rejoin your phone first: open Wi-Fi, tap the new name, type the new password — it is case-sensitive, every capital matters.
- Then the computer, the TV and its streamer, and the printer, the same way.
- Then the gadgets — cameras, plugs, speakers, the thermostat. Some rejoin from their app's Wi-Fi setting; some need their setup run again. One at a time, checking each comes back, beats doing five at once. The shelf's lesson Who Is On Your Wi-Fi? Meet Every Gadget on the List is the roll call to check them off against.
If one thing refuses to rejoin
- Check the band: many gadgets only speak the 2.4 network. If you gave the two bands different names, join the gadget to the 2.4 one.
- Tell a phone to Forget the network, then join it fresh — phones cling to the old password otherwise.
- Retype slowly. Most failures are one wrong character in a long password, not a broken gadget.
The trick that works the other way
Replacing the router someday? Set the new box to the house's existing name and password, and most gadgets reconnect by themselves, none the wiser. It is changing the name and password that costs the reconnecting afternoon — which is why it is worth doing deliberately, once, to names you chose, rather than living forever with the string of letters the installer left.
The whole lesson in one line: write the new name and password down first, change them in the router's Wi-Fi settings, then walk the house rejoining everything — phone first, gadgets last.
Words in this lesson
- SSID: the technical name for your Wi-Fi network's name — the one that shows in the list when a device looks for Wi-Fi.
- Admin password: the separate password that guards the router's own settings. Different from the Wi-Fi password guests use.
- Forget (a network): telling a phone or computer to erase a saved Wi-Fi name and password, so it can join that network fresh.