← All questions

TV

My TV won’t turn on. What should I check first?

356.My TV won’t turn on. What should I check first?

A dark TV is usually one of three things: the remote, the power, or the TV needing a real reset. Work through these in order — the first two fix it most of the time.

  1. Try the TV’s own power button. Skip the remote for a moment. The button hides under the bottom edge of the TV, or on the back corner. If the TV starts with its own button, the remote was the problem — put in fresh batteries and try again.
  2. Look for the little standby light. Most TVs show a small red or white light when they are plugged in and resting. No light at all means no power: check that the cord is pushed in firmly at the back of the TV, try a different wall outlet, and if the TV is on a power strip, make sure the strip is switched on — strips get bumped off more often than people think.
  3. Unplug it for a full 60 seconds. Pull the TV’s plug out of the wall, count a slow 60, plug it back in, and press the power button. TVs are small computers, and this is their real restart — it clears the freeze that a black screen usually is.
  4. Watch and listen as it tries. A click, a logo that flashes and vanishes, or a faint glow with no picture tells its own story: the TV is getting power but a part inside has failed. That is not a settings problem, and no button combination will fix it.
If the standby light is on and the TV answers its own button but the picture stays black, shine a flashlight at the screen up close — if you can faintly see the show playing, the screen’s light has gone out. Either way, a TV that clicks, flashes, or glows without a picture needs hands-on repair — that is a job for Sean.