378.My TV remote stopped working. What should I check?
A remote that suddenly does nothing is almost never a dead TV. Work through these in order — the cause is usually the first or second one. (If your remote belongs to a Roku stick or Fire Stick rather than to the TV itself, there is a separate tip for streaming remotes.)
- Prove it is the remote, not the TV. Press the power button on the TV itself — look along the side, the bottom edge, or the back. If the TV turns on and works, the TV is fine and every step below is about the remote.
- Put in fresh batteries — both of them. Batteries are the cause most of the time, and a remote can light up and still be too weak to reach the TV. Match the plus and minus ends to the markings inside, and use a pair from a fresh pack, not the drawer of maybes.
- Clear the path and clean the window. Point the remote straight at the bottom edge of the TV, where its receiving eye sits, and move anything standing in front of it. Wipe the small dark window on the front of the remote and the matching spot on the TV with a dry cloth.
- Restart both ends. Take the batteries out of the remote, press its power button for 10 seconds, then put the batteries back. Unplug the TV from the wall for a full 60 seconds, plug it back in, wait for it to start, and try the remote again.
- If yours is a smart remote, pair it again. On a Samsung Smart Remote: hold the Back and Play/Pause buttons together for about 3 seconds, close to the TV, until it says it is pairing. On an LG Magic Remote: hold Home and Back together for 5 seconds to reset it, then click the wheel while pointing at the TV to pair it again. On a Sony remote, the pairing choice lives in Settings → Remotes & Accessories. While you sort it out, your phone can stand in: the free SmartThings app (Samsung), LG ThinQ app (LG), or Google TV app works as a remote on the same Wi-Fi.
If only one or two buttons have stopped while the rest work, that is wear or a spill inside the remote, and pairing will not fix it — a replacement remote must match your TV’s model (the model number is on a sticker on the back of the TV). Sean can match and pair a replacement for you, or set up one simple universal remote to run the TV and the sound together.