475.My watch won’t update. What do I do?
Your watch says an update is ready — or the phone app says one is — and then it sits at “preparing” for an hour, fails, or never starts at all. A watch update is the most fussy update in the house, because three things have to line up at the same time: the phone has to be up to date first, the watch has to be on its charger, and the two have to stay near each other on your home Wi-Fi. Miss any one of the three and the update quietly refuses. Work through your brand’s road in order; nearly every stuck watch update is one of these checks, not a broken watch.
- Before anything: set the stage the same way for every watch. Update the phone first (its own Settings update), because a watch update built for a newer phone system will stall until the phone catches up. Then put the watch on its charger and leave it there — most watches will not install an update below half charge, and several will not even start off the charger. Keep the phone beside the charger, both on your home Wi-Fi, and give the whole job a quiet half hour. An update that looks frozen at “preparing” is often just working slowly; do not unplug things in the first half hour.
- Apple Watch — update from the Watch app on the iPhone. Open the Watch app on the iPhone, tap General, then Software Update. If an update is offered, tap Download and Install and enter the iPhone passcode if it asks. The update travels from the phone to the watch, so the watch stays on its charger and the phone stays nearby until the watch restarts on its own and the progress circle completes. (Newer Apple Watches can also do it alone: on the watch, Settings → General → Software Update — but the phone road is the steadier one when an update has already failed once.)
- Samsung Galaxy Watch — update from the Galaxy Wearable app. Open Galaxy Wearable on the phone, tap Watch settings, then Watch software update, then Download and install. Same rules: watch on its charger, phone close by, and let it finish without wearing the watch off. On the watch itself you may also find it under Settings → Software update (the wording varies a little by model). If you use a Fitbit instead, its updates arrive inside the Fitbit app: tap your picture, tap your device, and an Update choice appears there when one is waiting — keep the Fitbit near the phone while it runs.
- If it still fails: make room, then restart both. The next cause is a full watch. Music, podcasts, and photos pile up on a watch quietly. On Apple Watch, the Watch app’s General → Storage page shows what is taking space; deleting a downloaded playlist or two is usually enough. On a Galaxy Watch, Watch settings leads to its storage page the same way. Then restart both devices — phone and watch, fully off and back on — put the watch back on its charger, and try the update once more. A restart clears more stuck updates than any other single step.
- The last resort, and the honest limits. If the update fails the same way three times on a charged watch with room to spare, an Apple Watch can be unpaired and paired again from the Watch app, which installs the newest system as part of setting it up again — unpairing makes a backup on the phone first, so your faces and health history come back, but set aside real time for it, and it is a fair job to hand to Sean if it makes you uneasy. One thing never to do: let the watch battery die in the middle of an install. If the charge is dropping faster than the update is moving, stop, charge it full, and start over — an update interrupted by a dead battery is the one version of this problem that can truly strand a watch.
A watch update needs three things at once: phone updated first → watch sitting on its charger, at least half full → phone beside it on home Wi-Fi. Apple Watch updates live in the iPhone’s Watch app under General → Software Update; Galaxy Watch updates live in Galaxy Wearable under Watch settings → Watch software update. Still failing? Free up space, restart both, and try once more.