507.My soundbar keeps turning off by itself. How do I make it stay on?
The picture is fine, the show is still playing — but the sound has gone, and the little light on your soundbar is dark. You turn the bar back on and, a while later, it does it again. Soundbars are built to switch themselves off. Almost every bar has an automatic standby: sit silent or very quiet for a stretch (often around 15 to 20 minutes) and it powers down to save electricity. Quiet dialogue, a paused show, or a TV whose sound was never actually routed through the bar can all look to the bar like “nothing is playing.” A second cause rides along the HDMI cable: the bar may be obeying power commands from the TV or another gadget. Neither means the bar is dying. (If the TV itself is turning off too, that is a different job — our TV tip about a TV that turns itself off in the middle of a show owns the sleep-timer hunt.)
- First, prove which gadget is off. When the sound next stops, look before touching anything: TV picture still playing, bar’s light out? It is the bar’s own standby or its power link, and this page is the fix. Turn the bar on with its own remote and note whether it wakes instantly (standby) or needs coaxing (a power problem).
- Turn off the bar’s automatic standby. This is the setting that fixes most bars, and every maker names it differently: look on the bar’s remote or in its phone app for Auto Standby, Auto Power Down, or an Eco switch, and turn it off. Samsung bars hide it in the bar’s settings menu (some models: hold a remote button for the standby timer); LG calls it Auto Power Down in the LG Sound Bar app; Yamaha and Sony bars carry it in their settings as Auto Standby / Standby Through options. The words drift by model and year — the address that stays put is the bar’s own settings, not the TV’s. With auto standby off, a bar stays awake through the quietest film.
- Check the power link (HDMI-CEC) if the bar sleeps when the TV blinks. If the bar turns off the moment the TV changes input, powers down, or a streaming stick restarts, the bar is obeying orders down the HDMI cable. Two honest choices: leave the link on if you like one remote waking everything together (and accept the bar following the TV’s naps), or turn the bar’s power-link / CEC-follow setting off in the bar’s menu so it answers only to you. Our TV tip about a remote that turns on the wrong thing explains the TV-side names (Anynet+, SIMPLINK, Bravia Sync) if you want the whole chain quiet.
- Feed it a signal it can hear. If the bar only drops during very quiet scenes or while a show is paused, it is the silence timer, not a fault: unpausing or a moment of volume wakes it, and step 2’s setting is the permanent cure. Also confirm the sound is truly coming through the bar (our Sound tip about getting sound through a soundbar walks the ARC check) — a bar receiving nothing at all will always, correctly, go to sleep.
- The small print: a bar that turns off mid-loud-scene, crackles as it goes, or will not wake with its own remote is telling a different story — a failing power supply, not a setting. That one is a warranty or Sean conversation, not more menu time.
The order that fixes it: confirm the bar (not the TV) is the one going dark → turn off Auto Standby / Auto Power Down / Eco in the bar’s own settings → if it sleeps in step with the TV, decide the HDMI power link on purpose. Most bars stay on for good after step two alone.