← All questions

Streaming

My Roku keeps restarting by itself. How do I stop it?

508.My Roku keeps restarting by itself. How do I stop it?

Your show cuts out, the Roku letters bounce on the screen, and you are back at the home page — or the Roku restarts in a loop and never settles at all. A Roku that restarts by itself is almost never worn out. The causes, in the order they actually happen, are: not enough power, too much heat, a stuck update, and only lastly a tired device. This page covers Roku sticks and boxes and Roku TVs; Fire TV sticks suffer the same first two causes and the same first two fixes, with Fire TV words noted where they differ.

  1. Give it wall power, not TV power. This is the number-one cause and the cheapest fix. A stick plugged into the TV’s USB port is fed by a port that was never built to power it — it runs, but sags and restarts whenever the picture gets busy. Plug the Roku’s power cable into the wall adapter it came with, in a wall outlet or power strip, and leave the TV’s USB port empty. Our Streaming lesson about streaming devices gives the same advice at setup; on a restarting Roku it is not advice, it is the repair. (Fire TV: identical — its own wall adapter, not the TV’s USB.)
  2. Let it breathe. Sticks live behind hot TVs, often resting on the TV’s warm back or a cable box. Heat makes them restart to protect themselves. Feel the stick: uncomfortably hot means move it — use the short HDMI extender (Roku will mail one free from its site, and many sticks shipped with one) so the stick hangs in open air, away from the TV’s back and off the top of other warm boxes. A Roku TV that restarts: clear anything blocking its vents and give the back of the set air.
  3. Do one proper restart and let any update finish. Unplug the power for a full 30 seconds (pulling the power, not pressing a remote button), plug back in, and let it sit at the home screen for five minutes. Then check for an update on purpose: Settings → System → Software update → Check now (older menus call it System update). A Roku that keeps trying and failing the same update can restart around it; finishing the update, on wall power, ends that loop.
  4. If it restarts in one app only, the app is the problem, not the Roku: remove that channel and add it back (highlight it, press the star button, Remove channel; then add it again from the Streaming Store). If it restarts on the home screen itself, with wall power and air, the causes above are ruled out and what is left is honest: a failing stick (they are inexpensive and your account, apps, and sign-ins live in your free Roku account, so a replacement rebuilds itself at sign-in) or, on a Roku TV, a repair conversation. A factory reset — Settings → System → Advanced system settings → Factory reset — is the last resort before replacing, and it is a true last resort: it erases the TV’s settings and sign-ins, so do it only with an evening free, or with Sean on the phone.
Work it in this order: wall adapter, not the TV’s USB → air around the stick → unplug 30 seconds, then Check now for the update. Those three cure nearly every restarting Roku. One-app restarts mean remove and re-add that app; a home-screen loop after all three is a failing device, not a settings failure on your part.