512.My maps gives me no voice directions at all. How do I get the voice back?
The map moves, the blue line crawls along — and the voice says nothing. Not quiet: nothing. That is a different problem from a voice that is merely too soft (our Maps tip about a voice that is too quiet owns that one, and its volume trick is step 4 here). Total silence almost always means the voice has been switched to silent, set to warnings only, or sent somewhere you are not listening — most often to the car’s speakers while the car is playing the radio. Nothing has broken. Check these in order, ideally with a short test drive to the end of your street.
- The button on the driving screen. Start directions to anywhere, then look at the speaker / sound picture on the driving screen itself. It has three states: full voice, alerts only (warnings, but no turn-by-turn talking), and muted (often shown with a line through it). A pocket, a passenger, or a stray tap can land it on muted. Tap it until it shows the full-voice state. Our Maps chart about route settings shows this same choice in its table — it is the single most common cause of a silent map.
- Alerts only, set in the menus. If the button looks right but you still hear only warnings: in Google Maps, tap your profile picture → Settings → Navigation settings and make sure the sound choice is full directions, not alerts only. In Apple Maps, open Settings → Maps → Spoken Directions and turn spoken directions on.
- The voice may be going to the car. If directions play over Bluetooth, the phone sends the voice to the car — and if the car is set to radio or another source, the voice plays into a room you are not in. Two honest choices: switch the car’s source to Bluetooth so you hear it, or keep the voice on the phone — in Google Maps that is Navigation settings → Play voice over Bluetooth, turned off; Apple Maps has the matching choice on its Spoken Directions page. Our Maps lesson about the guiding voice walks these routing choices in full.
- Volume, caught at the right moment. Phone volume for directions only exists while the voice is speaking. On your test drive, the moment a direction begins, press the volume-up button. If your test drive produces no direction at all to catch, that points back to steps 1–3, not to volume.
- Still silent everywhere? Try the other maps app on your phone (Google Maps if you use Apple’s, or the other way round) for one short drive. If the second app talks, the first app’s settings hold the answer — re-check steps 1–2 there. If neither talks, restart the phone and test once more before suspecting anything bigger; a fresh start clears the stuck-silent state more often than any menu does.
Silent is not quiet: check the speaker button on the driving screen first (muted and alerts-only live there), then ask where the voice is being sent — a car on the radio input swallows it whole. Volume is the last check, and only counts while the voice is actually speaking.