← All questions

Smart Home Gadgets

My smart lights keep flickering. What is causing it, and how do I stop it?

513.My smart lights keep flickering. What is causing it, and how do I stop it?

Your smart lights shimmer, blink, or strobe — sometimes only when dimmed, sometimes at random. First, one safety line before any fixing: if a flickering light also buzzes, smells hot, or the fitting feels warm, switch it off and stop here — that is an electrician’s job (or Sean’s), not a settings job. Ordinary flicker with none of those signs has a short list of everyday causes, and the top one surprises people: a smart bulb behind an old dimmer switch is being starved of power on purpose, all day long.

  1. The dimmer trap — the number-one cause. Smart bulbs do their own dimming, in the bulb. An old wall dimmer feeding them is also dimming, from the wall — two dimmers fighting is flicker, guaranteed. If your smart bulbs are on a dimmer switch: turn that wall dimmer all the way up to full and leave it there forever, and do your dimming in the app or by voice instead. If the flicker stops at full power, you have found it. (The lasting cure is swapping the dimmer for a plain on/off switch — a small job, but it is wiring: an electrician’s or Sean’s job, not a first try.)
  2. One bulb, or all of them? This question splits the list. One bulb flickering points at that bulb: switch the power off, let it cool, and screw it in again firmly — a bulb a quarter-turn loose flickers exactly like a failing one. Still flickering, screwed in tight, at full brightness? That bulb is dying; swap in a known-good bulb and, if the socket behaves, replace the flickerer. Every bulb on the same switch flickering together points away from the bulbs — back to step 1’s dimmer, or to the circuit itself, which is hands-off: electrician.
  3. Flicker only when dimmed low? Many smart bulbs shimmer at their very lowest brightness settings — the bulb is sipping power at the edge of what it can use. In the bulb’s app, raise the dimmed level a little (a scene set to 10% may behave at 25%) and see if the shimmer settles. If it does, set your evening scenes at that level and the problem is solved in practice.
  4. Flicker in a lamp with its own dimmer knob is step 1 wearing a table lamp’s clothes: turn the lamp’s knob to full, or move the smart bulb to a plain lamp or ceiling fitting.
  5. What flicker is not: a Wi-Fi problem. A bulb losing its connection goes dark, answers slowly, or shows “unresponsive” in the app (our Smart Home tip about a bulb that stopped answering owns that one). A bulb that stays lit but shimmers has a power or bulb problem, and no router restart will fix it.
In order: any buzzing, heat, or smell means off and hands-off → wall dimmer to full (and dim in the app instead) → one bulb means reseat it, then judge the bulb; all bulbs together means the dimmer or the circuit → low-brightness shimmer means raise the dim level a little. Nine flickers out of ten end at the dimmer.