560.My AirPods case won’t charge. What should I check?
Your earbuds live a two-step life: the buds charge from the case, and the case charges from the cable. When charging stops, the break is in one of those two links — or in the little metal handshake between a bud and the case. This page finds which link, in the order of likeliest first. It is written for Apple’s AirPods, and every step has its Samsung Galaxy Buds twin, because the two work the same way underneath; most other earbuds in a case follow the same ideas too.
- First, work out which link is broken. Put both buds in the case, plug the case in, and wait fifteen minutes. On an iPhone, open the case lid near the phone and a card pops up showing two percentages: the buds’ and the case’s. On a Samsung, open the Galaxy Wearable app for the same two numbers. If the case percentage never climbs, the break is between the wall and the case — steps 2, 3, and 5. If the case is fine but one bud never charges, it is that bud’s handshake — step 4.
- Swap the cable and the plug. Borrow a cable and a charger you know work — the ones that charge your phone every night. Earbud cases sip very little power, so any honest cable that fits will do; just make sure it is the right mouth: older AirPods cases take Apple’s Lightning plug, the newest ones and all Galaxy Buds cases take USB-C. If your case also charges wirelessly (most recent AirPods and Galaxy Buds cases do), set it on a charging pad as a second opinion: charges on the pad but not on the cable means the cable or the case’s port is lying, and step 3 is your answer.
- Clean the case’s charging port. The little socket on the case lives in pockets and purses, and lint packs into it until the plug can no longer push all the way in — it looks plugged in, and isn’t, quite. Shine a light in and look. Fish gently with a dry wooden toothpick; never anything metal, and never blow with your mouth (the moisture does harm). Then plug in again and make sure the plug seats with a firm, full push.
- Clean the contacts — the one-bud fix. Inside each well of the case sit tiny metal points, and matching metal rings on the bottom of each bud. A film of wax and pocket dust on either side breaks the handshake. Wipe both with a dry soft cloth or a dry cotton swab — nothing wet. Then reseat the bud: it should settle in with a magnetic snap. A bud sitting slightly proud — an ear tip folded the wrong way can do it — will not charge and will not say why.
- A case that died completely needs time before it can be judged. A case left flat in a drawer for weeks can take half an hour on the cable before any light wakes up at all. If yours has been empty a long time, plug it in and leave it a full 30 minutes before deciding anything. Coming back slowly is normal; still dark after half an hour on a known-good cable is information.
- Reset the buds. If the case charges but the buds behave oddly — one drains in minutes, or the pair has forgotten the phone — a reset reintroduces everyone. AirPods: buds in the case, lid open, press and hold the small setup button on the back of the case until the light flashes amber, then white; then pair again from the phone’s Bluetooth page. Galaxy Buds: open Galaxy Wearable → Earbuds settings → Reset, then pair again the same way.
- The honest end. If a known-good cable, a clean port, clean contacts, a long patient charge, and a reset change nothing, the battery inside the case itself is likely finished — and case batteries are not a repair job. The good news: a replacement case is sold on its own (Apple sells AirPods cases separately; Samsung likewise for Buds) and pairs with the buds you already own. If choosing one feels like a maze, call Sean — this is a five-minute sort-out, not a new-earbuds purchase.
In short: find the broken link first — case percentage stuck means wall-to-case (steps 2, 3, 5); one bud stuck means its contacts (step 4) → swap in a cable and plug you know work (Lightning on older AirPods cases, USB-C on the newest and on Galaxy Buds) → clean the case’s port with a dry wooden toothpick, never metal → wipe the little metal contacts in the wells and on the buds dry, and reseat until the bud snaps home → a long-dead case gets 30 minutes before it is judged → reset (AirPods: the button on the back until amber-then-white; Galaxy Buds: Wearable → Earbuds settings → Reset) → still nothing means the case battery is done — and a replacement case is sold alone and pairs with your buds.