713.How do I check whether my security camera is really recording?
The honest test is the same for every brand, and it takes two minutes: give the camera something to record, then go and look for the recording. A camera that made a fresh clip of you is a camera that works. Lights and settings screens alone do not prove it.
The walk test (every brand)
- Open the camera’s app on your phone.
- Walk slowly in front of the camera, wave, and count to ten. Wait about a minute.
- Open the app’s history, events or library page. You should find a brand-new clip of yourself, stamped with today’s time — and your phone will often buzz with a motion alert as well.
- No clip? Check the camera is armed / motion detection is on (below), its Wi-Fi is connected, and — for battery cameras — that it still has charge.
Brand notes
- Blink: a steady blue light on the camera means it is recording or someone is watching live. You can turn that light off in Device Settings → General Settings → Status LED — so a dark Blink may still be recording fine; the walk test is the proof. (On a Blink doorbell the light lives in the button.)
- Ring: check the mode first — in Disarmed mode a Ring camera records nothing on purpose. Motion recording has its own switch in Device Settings → Motion Detection. The truth lives in Event History: your walk should be there.
- Arlo and others: the app’s library is the proof for these too — a fresh clip with your wave in it. A camera in standby or with its mode set to disarmed will watch and record nothing.
Where the recordings live, and how long they are kept, is its own topic — our lesson on camera recordings lays it out brand by brand, and this one translates camera words like zones and sensitivity into plain English.
In short: walk in front of it, wave, then look for the new clip in the app’s history. That clip is the only real proof. No clip: check the camera is armed, motion detection is on, Ring is not Disarmed, and the battery and Wi-Fi are alive.