← All questions

Phones

My phone will not vibrate. How do I get it back?

764.My phone will not vibrate. How do I get it back?

You keep the phone on silent so it will not ring in church or at the doctor — but now it does not buzz either, and calls slip past unnoticed. Vibrate has more than one switch, and any one of them can be off. Check them in this order, then test with a real call.

1. On an iPhone

  1. Open Settings → Sounds & Haptics. Under Haptics, choose Always Play (on older iPhones this reads “Vibrate on Ring” and “Vibrate on Silent” — turn both on).
  2. Check the master switch: Settings → Accessibility → Touch → Vibration must be on. If this one is off, the phone will not vibrate for anything at all — not even emergency alerts.
  3. The little switch on the side of the phone (above the volume buttons) only chooses ring vs. silent — with the settings above right, the phone buzzes in both positions.

2. On a Samsung phone

  1. Swipe down from the top twice and look at the Sound tile: it should say Vibrate (a phone with wavy lines) or Sound — if it says Mute, tap it until it changes. Mute means no ring and no buzz.
  2. Then Settings → Sounds and vibration: set the sound mode to Vibrate or Sound, and check Vibration intensity — its sliders (calls, notifications, touch) must not be at zero.

3. On another Android phone (Pixel and others)

Press a volume button, then tap the picture above the volume bar and choose the vibrate picture (a phone with wavy lines). Then check Settings → Sound & vibration and make sure vibration for calls is on.

4. Test it, and the honest last answer

Call your phone from another phone and watch it buzz. Also try an alarm — alarms use the same buzzer. If the settings are all on and the phone never buzzes — not for calls, alarms, or typing — the little motor inside has likely failed. That is a repair, not a setting, and no app can fix it.

In short: iPhone — Haptics on Always Play, plus Accessibility → Touch → Vibration on. Samsung — the Sound tile must not say Mute, and vibration intensity must not be zero. Set right but never a buzz? The motor has failed — a hands-on repair.