Health
This tip is only about the connection — getting the app and the sensor talking. It is not medical advice, and questions about readings belong to your care team. Connection problems have a short list of usual causes, and they are the same for both big sensor families.
Dexcom pairs inside its own app — do not pair it from the phone's Bluetooth list; if an old sensor appears there, forget it there. In the Dexcom app, start the new sensor and type or scan its code exactly. If the app says it is searching for more than about 10 minutes, restart the phone and open the app again — do not start a second sensor.
Libre 2 starts by scanning: hold the back of the phone flat against the sensor and move it slowly until it buzzes — the scan spot differs by phone (top edge on most iPhones, middle of the back on most Android phones), and a thick case can block it, so try once with the case off. Libre 3 connects by Bluetooth after the app starts it, so the step-1 checks are its list. If a scan fails twice, wait a minute between tries — rapid repeated scans make it worse, not better.
These apps only support certain phone models and system versions — a brand-new phone system update can outrun the app for a few weeks. If everything above is right and it still will not connect, check the app store for an update to the sensor app, and if there is none, call the sensor maker's support line in the app: sensor connection help is free, and they can also replace a sensor that never started.