Power & Batteries
You set your phone on the wireless charging pad and it starts… stops… starts again — or the pad's light blinks and nothing charges at all. Wireless charging is fussier than a cable about position and cases. Work through these in order.
The charging coils in the phone and the pad must overlap. A phone sitting half an inch off-centre can charge slowly, stop and start, or not charge at all. On an iPhone with MagSafe, the magnets snap the phone into place — if yours does not snap, the case may be blocking the magnets. On Samsung and other Android phones, slide the phone slowly around the pad until the charging message holds steady, then leave it exactly there.
Thick cases, metal plates, magnetic car-mount discs, grip rings, and credit cards or a wallet between phone and pad all interrupt wireless charging. Cards can also be damaged by it. Test once with the bare phone, or with any card wallet removed. If it charges bare, you have found it.
Wireless charging warms a phone more than a cable does, and phones protect themselves by pausing when hot. If the phone feels warm, take the case off, move the pad out of sunlight and away from radiators, and stop playing videos or games while it charges. Pauses that only happen in a hot room or a hot car are this protection working, not a fault.
A pad is only as strong as what feeds it. Plug the pad into its wall adapter — not a weak computer USB port or an old low-power plug — using the cable that came with it. A blinking pad light often means "not enough power" or "something metal detected," and a stronger adapter fixes the first of those.
Charge the phone with a plain cable. Charges fine by cable but never on two different pads? The phone's wireless charging itself may have failed. Charges on a friend's pad but not yours? Your pad or its adapter has failed — pads are inexpensive and wear out.