← All questions

Printers

My printer says the ink is empty even though I just replaced it. What do I do?

783.My printer says the ink is empty even though I just replaced it. What do I do?

You put in a brand-new cartridge, the printer thought about it — and announced the ink is empty, or that it cannot recognize the cartridge at all. Before you buy another one: a new cartridge that a printer refuses is usually a seating problem, a protective strip still in place, or the printer's memory holding on to the old cartridge's empty reading. Work through these in order.

1. Open it up and reseat the cartridge

  1. Leave the printer on — the cartridge carrier only moves into place with power on.
  2. Open the cover, wait for the carrier to stop, and lift the new cartridge out.
  3. Check for anything you missed: a strip of tape or a plastic clip over the copper-colored contacts or the ink opening. New cartridges ship with protection there, and one forgotten strip causes exactly this message.
  4. Wipe the copper contacts gently with a dry, lint-free cloth. Fingerprints and dust are enough to break the connection.
  5. Slide it back in and press until it clicks. A cartridge that looks seated but never clicked is the single most common cause.

2. Make the printer forget the old cartridge

Some printers remember the old cartridge's empty level and keep showing it for the new one. Turn the printer off, unplug it from the wall for a full minute, then plug it back in and turn it on. That restarts its memory, and many printers then read the new cartridge fresh and print an alignment page.

3. The "not genuine" message is different — that one is fine

If the message says the cartridge is not genuine, not recognized as original, or names a store brand: that is the printer complaining about the maker, not about the ink level. Store-brand cartridges usually work well. Tap OK, Continue, or Proceed and print a test page. If the page looks right, you are done — the warning may appear once more and then stop.

4. Check you bought the exact number

Cartridges that look identical come in near-twin numbers, and the wrong twin fits loosely or not at all. Compare the number on the new cartridge with the number on the old one (952, 67, TN-760, and so on) and with your printer's name. One digit off is a return trip to the store, not a printer fault — keep the receipt and the packaging.

5. Tank printers and laser printers

Tank printers (Epson EcoTank, Canon MegaTank, HP Smart Tank) have no cartridges: if yours still says a color is low after a refill, you likely filled a different tank than the one that was low — check the front windows again, color by color. Laser printers: slide the toner cartridge out, rock it gently side to side five or six times, and slide it back in firmly; a toner that sat on a shelf settles, and some printers also need the chip contacts wiped as in step 1.

6. When it is really the cartridge

If the same message follows the cartridge through every step above — and especially if a second new cartridge works — the cartridge itself has a faulty chip. That happens, even with name brands. Take it back with the receipt; stores exchange a cartridge that a printer cannot read. Do not buy a third one hoping for luck.

In short: printer on, cartridge out → hunt for a forgotten tape strip → wipe the copper contacts → back in until it clicks → unplug for a full minute so the printer forgets the old empty reading → a "not genuine" warning is safe to OK → check the cartridge number matches the old one exactly.