Home Alarm Systems: Ring, SimpliSafe, and ADT in Plain Words

A home alarm system is a set of small sensors on your doors and windows, a loud siren, and one box that ties them together. When a door opens while the system is armed — switched on — the siren sounds and, if you pay for monitoring, a real person at a monitoring center is told. This lesson covers the three names you will hear most — Ring Alarm, SimpliSafe, and ADT — how you switch each one on and off, and the one choice that matters most: who answers when it goes off.

Words to know first

The three systems, one by one

Switching it on and off — the daily habit

  1. Leaving the house: close the doors and windows, then press Away — on the keypad (Ring asks for your code first) or in the app. The exit delay gives you time to walk out and lock up.
  2. Coming home: open the door and go straight to the keypad. Type your code and press Off or Disarmed before the entry delay runs out. In the apps, one tap on Off or Disarmed does the same job, and the app does not ask for the code.
  3. Going to bed: press Home. The doors and windows are guarded; you can move about inside freely, because the motion sensors rest in this setting on all three systems.
  4. Give each person their own code. Ring and SimpliSafe both let you add separate codes for family or a trusted neighbor. The app history then shows whose code was used — and a code can be removed the day it is no longer needed, which a shared code cannot.

The big choice: who answers when it goes off?

What it costs — in plain terms

Fix common problems

The whole set is lined up side by side in our chart Home Security Beyond Cameras at a Glance. For the guards that watch when no intruder is involved, see Smart Smoke and Carbon Monoxide Alarms and Water-Leak Sensors.

Words in this lesson

Straight 2 Work Tech, LLC — patient, plain-words tech help.
(813) 770-6082