Smart Smoke and Carbon Monoxide Alarms: The Guard That Never Sleeps
A smoke alarm shouts when there is smoke. A carbon monoxide alarm shouts when there is a gas you cannot see or smell. A smart one does both jobs and also tells your phone — so the warning reaches you in the garden, at the store, or at your daughter's house. This lesson covers where alarms belong, the names you will meet — Nest Protect, First Alert SC5, and the detectors that join Ring and SimpliSafe alarms — how to test them, and the one date that matters: the day the whole alarm must be replaced.
Words to know first
- Carbon monoxide (CO): a gas made by anything that burns fuel — a gas furnace, a water heater, a stove, a fireplace, a car in the garage. You cannot see it or smell it, and it can kill in your sleep. Only a detector can warn you.
- Combined alarm: one unit that senses both smoke and carbon monoxide. Most smart alarms are combined.
- Interconnected: when one alarm sounds, they all sound. A fire in the basement is no use if the bedroom alarm stays quiet — interconnection is what carries the warning to where you sleep.
- Heads-up warning: Nest Protect's early, spoken warning — it names the room and says there is smoke, before the full siren. It gives you a moment to check a smoking pan before the house is at full volume.
Where alarms belong
- Smoke alarms: inside every bedroom, in the hall outside the bedrooms, and on every floor of the house, basement included. That is the fire-service rule across the United States, and your town may ask for more — the local rule wins.
- Carbon monoxide alarms: outside the bedrooms, and on every floor — and near, not inside, rooms with fuel-burning appliances. Google's placement guide for Nest Protect says the same shape: every floor, and the rooms with fuel-burning appliances covered.
- On the ceiling is best — smoke rises. Google's guide asks for the alarm at least 12 inches from any wall on the ceiling; on a wall, high up, a hand's width to two feet below the ceiling. On a sloped ceiling, near the peak, not at it.
- Keep clear of the kitchen's steam and the shower's. Fit smoke alarms at least 10 feet from a stove where you can — cooking fumes and bathroom steam are the two great causes of false alarms, on every brand. SimpliSafe's own advice for its detector is the same: keep it away from anything that makes steam.
- Not in the garage or an unfinished attic. Dust, heat swings, and car exhaust fool alarms there. Google prints this plainly for Nest Protect, and it is true of the rest.
The names you will meet
- Google Nest Protect. The best-known smart alarm: it speaks the room name, gives the heads-up warning, tests itself quietly, and its phone app shows every alarm in the house. One change to know: Google has stopped selling Nest Protect. Ones already fitted keep working and stay supported, but they must be replaced 10 years after the date they were made — that date is printed on the back. When yours comes due, Google points to the First Alert SC5 below as the replacement, and it fits the same bracket.
- First Alert SC5. First Alert is the long-standing fire-alarm maker; the SC5 is its smart combined smoke and CO alarm, in battery and wired versions. It works in the First Alert app and in the Google Home app, sends phone alerts, and can interconnect with Nest Protects already in the house, so you can replace alarms one at a time as each comes due. Check, silence, and test from either app.
- Detectors that join an alarm system. Ring and SimpliSafe each sell smoke and CO detectors that report through their alarm base stations (our lesson Home Alarm Systems covers those systems). The gain: with professional monitoring, the monitoring center is told as well as your phone — and for carbon monoxide, SimpliSafe's center requests the fire department without waiting for you to cancel. The limit: these detectors belong to their system; they are not the choice if you have no alarm and want none.
- Plain alarms still count. A non-smart alarm that is in date, in the right rooms, and tested is far better than a smart one still in its box. Smart buys you the phone alert when you are out — nothing more magical than that.
Testing and looking after them
- Test every alarm once a month. Press the Test button until it sounds, or start the test from the app — Nest Protect and the SC5 both offer an app test, and Nest Protect can run a quiet self-check of its speaker and horn. A test that only lights a lamp is not a test of the sound; you want to hear it.
- Listen for the end-of-life chirp, and believe it. Smoke alarms are replaced whole after 10 years — the sensors wear out even if the alarm still beeps. The made-on or replace-by date is printed on the back or side of every alarm. When you move into a home, checking those dates is a first-week job.
- Batteries: alarms with replaceable batteries ask about once a year — many people use the clock-change weekends as the reminder. Sealed-battery and smart alarms run for years and warn you in the app and with a chirp when they are low; Nest Protect's battery version uses long-life lithium batteries it reports on in its nightly check. Never borrow an alarm's battery for the remote control. An alarm with no battery is furniture.
- Keep them clean. A gentle vacuum brush over the vents twice a year keeps dust out of the sensing chamber — dust is a false-alarm cause on every brand. Never paint an alarm, and never clean inside it with water or sprays.
- If carbon monoxide is ever reported: get out, then call. Leave the house, then call 911 or the fire department from outside. Do not open windows and wait inside to see. The alarm is not the emergency — it is the warning before one.
Good to know
- The alarm must work with no internet at all. Every alarm on this page sounds its own siren at home whether or not the Wi-Fi is up. The phone alert is the extra; the shout in the hall is the alarm.
- Silencing is for burnt toast, briefly. The app or the button hushes a false alarm for a few minutes. If an alarm keeps sounding for no clear reason, do not silence it into a habit — move it farther from the steam, clean it, and if it is near its 10 years, replace it.
- Renting? In most places the landlord must provide working alarms; whose job the batteries are varies. Ask once, in writing, rather than guessing.
See the side-by-side in our chart Home Security Beyond Cameras at a Glance, and the water-side guard in Water-Leak Sensors: A Small Puck That Saves a Floor.
Words in this lesson
- Photoelectric sensor: the smoke-sensing kind in most smart alarms — it notices smoke dimming a beam of light inside the unit. Good at slow, smoky fires, and less easily fooled by a steamy shower than the other kind.
- Hardwired: powered by the house wiring, usually with a battery backup. Wired alarms are a job for an electrician if the wiring is not already there; battery alarms fit with two screws.
- End of life: the date after which an alarm's sensors can no longer be trusted. It applies to every smoke and CO alarm, smart or plain.